UpShelf Installation Instructions
UPSHELF install or removal: 5 seconds, no tools needed!
First-time hub installation: 1 minute with any screwdriver.
For repeated use: in most applications, the hub can remain attached to the pole.
STEP 1:
Attach hub halves to pole at the location desired for UPSHELF. Use corner grooves for square poles, and spacer for thinner poles, if necessary. Tighten evenly and FIRMLY.
STEP 2:
Place UPSHELF around pole above hub and clasp the two halves together as shown. Take care to keep fingers clear of closure area. The integral latch will click when engaged.
STEP 3:
Lower the UPSHELF onto the hub. Turn clockwise until resting flat on hub.
STEP 4:
Hold UPSHELF close to pole and turn clockwise to firmly engage hub. It may be necessary to hold hub from below if pole turns.
Get Started Today
Custom colors, decals and imprinting available, please inquire.
Email: sales@upshelf.com
Phone: (847) 776-0914
Swint Enterprises, INC.
P.O.box 277
Palatine, IL 60067